| Subject | Text |
| Car Audio Capacitor | The audio system in our cars is an assortment of different parts. Each and every part in the system |
| HELP stero repair | my first post, thanks for reading. i am repairing my bosses (i know!)vintage receiver, pioneer sx95 |
|
|
| Telefunken stereo green sensor button problem | Can anyone point me to a repair shop capable of repairing a Telefunken "electronic center 6001 |
| Transistor question if you know electronics please help! | I need to replace a couple transistors and I have the numbers but don't know where to purchase them |
| HELP! Arton IK-51 [Russian synth]: Need rom & schematics | I am collector of music keyboards and bought on eBay a defective [i:e0db8a2f26]Arton IK-51[/i:e0db8a |
| Is the STA309a stereo input configured correctly for 2.1 out | Hi!
The STA309a documentation is a bit lacking on this topic, so some explanation is needed.
Requi |
| Re: onkyo TX-DS575X AV Receiver | [quote:847b137c3e="Lurker"]This is a common problem with Onkyos. There are about 10 muting transisto |
| Had the same problem, but AN 5270, dont seem to work as replacements, if you get one from a similar |
| Re: Yamaha RX-V750 | Hey there will try to help, The second click usually states that the post (Power on self test) has p |
| Tuner SH-2294VO (inside Denon DRA-295 AMP) | Hello all,
my DENON amp, is not tuning right (from the date it was bought). This is what it does |
| It worked! =D | Quick update guys...
I've replaced IC302 (MC14052) - 4-ch multiplex and it worked! This IC functi |
| Guitar amp problem | Hi folks, don't know if anyone can help me but my problem is this:
I've got a Sessionette 75 guit |
| Here is a couple of schematics.
The yellow is the pcb for the lamps and all you need is two wires d |
| Re: Panasonic Euro 4 Service mode | [quote:31de2e8c68="Beppe"]Hi, who can help me to set the service mode 2 on a Panasonic TX-25MK1 chas |
| First off, sorry about all the double and triple posts. I've justmade another interesting find. Thee |
| No sound from a Sony MDP-V9K | I have an old Sony MDP-V9K Lazerdisk player with no sound, power and picture work fine.
It was bein |
| The pots are potentiometers like the bass, trebble and balance knobs, and any function selector li |
|
|
| Rewire a VGA cable? | So here's my situation. I own a set of Logitech Z-2300 speakers. The control module that takes care |
| [quote:fcb0f223cd="fongs"]Then u could be having a bad transistor, dying up capacitor or bad groundi |
| Sadly, no. The fault was an open circuit resistor in the preamp stage, probably from overdriving it. |
| Have you tried adjusting the picture from your pc's display card driver settings?
I think you can |
| [b:0ac8d97c54][url=http://www.opentip.com/products/Emerson_Portable_Stereo_w_iPod_Dock_iPod_Electron |
| Service Manual MCS amp 3850 | I found this info on audioasylum.com:
A friend of mine just gave me his MCS integrated amp to |
| [quote:1c2dcfd480="Anonymous"]Thanks for the reply! Yes, it does make a clicking sound when turning |
| Yamaha RX-V1065 DC PRT Fault | Stumped again . . .
Have a RX-V1065 with about -2.5V on emitters of output transistors, SBL chan |
| Re: Trace Elliot Commando 1001 will trade for it | [quote:a4d257c75e="monty124"]i need a circuit diagram for a Trace elliot 1001 commando bass amp i ca |
| Amp schematic for Acoustimass 20 | Hi
Can anyone help me find one of these please? Two satellite amps are ok, bass amp is not working. |
| Bob,
Before condeming any device, best to attempt to narrow it further.
Based on the age & |
| LOOKING FOR MANUFACTURERS PART NUMBER | I'm looking for the manufacturers part number for an IC thats used in an Adcom tuner/preamp GTP-500/ |
| AU BUS | Well you have covered me thoroughly. As for the woofers I tried using the sabwoofer (Sound Blaster) |